1. Vacuum tube is blocked
During the operation of the vacuum cleaner, it is common to suck up objects that may block the vacuum tube, such as hard and strip materials. This could result in obstructed airflow, decreasing the vacuum cleaner's performance. To rectify this, it is advisable to dismantle the vacuum cleaner and clear out any clogs within the hose. Ensuring this is done timely will guarantee optimal functionality of the vacuum cleaner.
2, dust collector capacity
Using the vacuum cleaner for a long time without cleaning the garbage on the dust collector in time will reach the upper limit, as long as we take the dust out and put it back on for use.
3. The filter bag is blocked
General vacuum cleaner used for a long time, the filter bag will be covered with dust, over time will block the filter bag. If so, just shake the rack and shake off any dust that sticks to the filter.
4, dust transfer brush bristles have worn
Although the motor turns, but the brush can not dust, so the suction is very weak. If so, remove the rotary brush, adjust the position of the rotary brush assembly, so that the rotary brush bristles are close to the ground, rotation can be fully dusted, such as serious wear, can be replaced with a new brush.
5. Fan blade is not tightly fixed
When the fan blade slides on the motor shaft, it also affects the vacuuming effect. If so, the fan blade positioning screws should be tightened. 1. Unplug the power supply and ensure that the vacuum cleaner has been disconnected from the power supply.
2. Completely open the dust collecting bin of the vacuum cleaner and gently pull out the dust collecting bag.
Using caution, empty the dust collection bag by pouring the dust out from the opening. Next, carefully remove any large debris such as hair or broken objects from the bag. Clip these items out of the bag gently to avoid damaging the contents or the bag itself.
3. Wash the dust collection bag with clean water, and gently rub the dirty place with your hands. Remember not to be washed by machine.